
- Regular
- StatTrak™
- Float0.009712621569634
- TypeKnife
- RarityCovert
- ExteriorFactory New
The ★ M9 Bayonet | Gamma Doppler Phase 3 in Factory New (FN) has a marbled blade in green-turquoise tones. Covert rank, with the ★ mark. The finish has just two wears, Factory New and Minimal Wear, and its float scale runs from 0.00 to 0.08. Factory New takes 0.00 to 0.07, which is 88% of the whole scale.
What the ★ M9 Bayonet | Gamma Doppler Phase 3 looks like in Factory New
The blade resembles marble with turquoise, green and blue swirls. Turquoise dominates near the tip, saturated green runs through the middle, and a bluish tone sits closer to the guard. The guard and pommel are turquoise, and the rubberized handle is almost black. Valve says the knife is covered in black and silver metallic paint over a marbled base and sealed with a "candy" lacquer.
In Factory New the metal is free of scuffs, and the swirls read across the whole flat of the blade. Wear is locked in at the drop and stays put.
Where the ★ M9 Bayonet | Gamma Doppler Phase 3 came from
Valve itself made the artwork for the ★ M9 Bayonet | Gamma Doppler Phase 3, and no Steam Workshop submission stands behind this finish. It came out on June 15, 2016, and its Valve catalog number is 571. It lies in two cases: the Gamma Case and the Gamma 2 Case.
Phase and pattern
The phase is built into the item name: "Phase 3" is chosen on the page, not when a case is opened. Even so, copies differ within the phase. The pattern index changes the ratio of black, green and turquoise and where they sit on the blade. Copies dominated by turquoise are called "BTA Cyan". Specialist catalogs have no list of patterns for this knife, so we do not describe premiums for any particular index.
What to check before buying
What to match up when choosing the ★ M9 Bayonet | Gamma Doppler Phase 3:
- float: the scale gives this wear of the ★ M9 Bayonet | Gamma Doppler Phase 3 only 0.00 to 0.07, which is why copies look alike;
- the share of turquoise and green on the front of the blade;
- name tag: the knife accepts its own name, and the inscription stays through a transfer.
Knives have no sticker slots.
What the ★ M9 Bayonet | Gamma Doppler Phase 3 costs in Factory New
Among thirty-two M9 Bayonet finishes priced in this wear, Gamma Doppler Phase 3 stands above the middle: twenty-one cost less and ten cost more. Phase 1 is higher by a few percent. Phase 4, Boreal Forest, Lore and Autotronic are lower by a small margin. Bright Water, Freehand and Damascus Steel are the cheapest. Highest of all stand Gamma Doppler Emerald, Doppler Ruby and Doppler Black Pearl, which are the gems.
Getting the ★ M9 Bayonet | Gamma Doppler Phase 3
In CS2 the knife drops from two cases: the Gamma Case and the Gamma 2 Case. Crafting is the other route. Five Covert skins of one type, either all regular or all StatTrak, give a random rare special item from the collections of the skins put in. Neither finish nor phase can be chosen in it.
Is there a StatTrak version
StatTrak can be had on this M9 Bayonet finish as well.
Who this wear suits
Factory New on the ★ M9 Bayonet | Gamma Doppler Phase 3 makes sense for these purposes:
- you want a turquoise-green M9 Bayonet without the gems, the pricey Emerald or Ruby;
- your CS2 loadout is built on cool green and turquoise tones;
- the top wear of the finish matters, and Factory New copies cover almost the whole scale.




















































































