Black and White Skins in CS2: Best Picks and Prices

Black and white skins exist for almost every weapon type in CS2, and most of them are cheap: from under a dollar for the Galil AR | Tuxedo or CZ75-Auto | Twist to about $130 to $410 for the M4A1-S | Printstream, the best-known monochrome skin in the game. They fit a minimalist inventory and make a neutral background for stickers. Below are ten black and white skins for pistols, rifles, SMGs and shotguns with current LIS-SKINS prices, followed by a summary table.

USP-S | Stainless

The USP-S | Stainless is a clean example of minimalist design. The grip and suppressor are matte black, while the slide is left in light steel. A few markings round it out, a good fit for fans of realistic finishes. It dropped from CS:GO Weapon Case 3 and comes in all five wears, Factory New to Battle-Scarred. A regular copy starts at about $5, and Factory New costs around $40.

Dual Berettas | Dezastre

The Dual Berettas | Dezastre from the Operation Broken Fang Case follows a similar style with more detail. The grips and the top of the barrels are black, and the middle section carries technical lettering on a white background. Small geometric fragments and red accents add character. Prices run from about $2 in Battle-Scarred to around $20 in Factory New.

Five-SeveN | Kami

The Five-SeveN | Kami shares the color scheme of the two pistols above, with a black grip and a white top, but adds an unusual element: a slightly yellowed page of a Japanese comic that looks different depending on the pattern index. This Winter Offensive Weapon Case skin exists only in Factory New, Minimal Wear and Field-Tested, at $2 to $4.

CZ75-Auto | Twist

The CZ75-Auto has several black and white skins in a similar style, and the CZ75-Auto | Twist is one of them. The white body is paired with black panels and a few steel parts, and the top is covered in light gray spirals on black. From the Huntsman Weapon Case, it costs under a dollar worn and about $4 in Factory New.

MP9 | Arctic Tri-Tone

Despite the arctic name, the MP9 | Arctic Tri-Tone earns its place on a black and white list. A black and white stripe runs along the body, while the grip, stock and top stay pure white apart from a few orange accents. It comes from the Sport & Field Collection, has no StatTrak version and starts at about $2, with Factory New around $5.

M4A1-S | Printstream

For the M4A1-S, the obvious black and white pick is the M4A1-S | Printstream. A black stock and barrel against a white body covered in lettering make it instantly recognizable. It is a Covert skin from the Operation Broken Fang Case and the most expensive item here, from about $130 in Battle-Scarred to around $410 in Factory New. The rest of the series is covered in our article on the Printstream collection.

SG 553 | Hypnotic

Black and white skins often use more complex patterns. The body of the SG 553 | Hypnotic is covered in concentric circles that create an optical effect. This Havoc Collection skin exists only in Factory New and Minimal Wear, has no StatTrak version and costs around $50.

SSG 08 | Detour

Another black and white skin with a busy pattern is the SSG 08 | Detour. Its surface is a weave of black and white arrows that keep changing direction. This Overpass Collection skin dropped only from tournament souvenir packages between 2014 and 2016, so there is no StatTrak version, and regular copies cost $10 to $20.

XM1014 | Black Tie

True to its name, the XM1014 | Black Tie recalls a formal black and white suit. A translucent check pattern shows on the barrel and stock, and most parts are matte black or white. This Chroma 3 Case skin costs about $1, or around $3 in Factory New.

Galil AR | Tuxedo

The Galil AR | Tuxedo from the Bank Collection continues the suit theme. There is nothing extra in the design: the stock, grip and magazine are black, the barrel and center of the body are white, with no color accents or patterns. It is the cheapest skin here: under a dollar worn, about $3 in Factory New.

Black and White Stickers for CS2

A monochrome skin pairs well with stickers in the same colors: black and white artwork keeps the clean look, and a single colored sticker becomes the accent. Ready-made selections are in our articles on the best black stickers and the best white stickers in CS2, and examples of strong pairings are in our list of skin and sticker combos. For more finishes, see white skins in CS2, the best black skins and minimalist skins for CS2.

All Black and White Skins at a Glance