Most players are well aware of ways to adjust the fps or ping level, but when a problem arises with var in CS GO, they don’t know what to do with it. Var – quite a difficult indicator to understand. If you try to explain it in simple words, then it shows how different the picture on the screen of a gamer’s device is from what is actually on the server at a given moment in time. That is, how outdated the information and visual representation of information on your screen is compared to the information on the game server. In some cases, instead of showing an irrelevant image, you may experience freezes or jerks during the game.
In turn, the difference between the picture on the screen and the server depends on how much the FPS fluctuates. And this indicator largely depends on the technical condition of the gaming computer. Therefore, it becomes clear what to do if the var jumps in CS GO - first look for the causes of the problem in yourself.
Where to look for the var indicator?
You can view it in the console, but to do this you need to open it. This is done as follows:
-
Launch Counter Strike and go to the game settings.
-
Looking for the “Game” tab and click on it.
-
A menu with the names of the tabs will drop down. Again we find “Game” and click on it.
-
Let's see if access to the developer tools is open. Opposite the corresponding parameter, the switch must be set to “Yes”, otherwise the console will be impossible to open.
-
At the next stage, click on “Ё”, wait for the console to open.
-
Enter the command net_graph 1. Several indicators will appear in the lower right corner, among which is the desired var. Look for it in the top line, it is located between the fps parameter and the ping parameter.
What is the acceptable var level?
We evaluate its value. If the var level exceeds 1.5, then your affairs are bad. Visible “brakes” may even be absent, but your picture is one hundred percent behind the actual one. By the way, here is one possible explanation for your poor quality of play and the low number of kills with a large number of deaths: due to the delay in displaying the actual image, you are shooting into the void. We'll tell you what to do if the var in CS GO rises to unacceptable values a little later.
Var level from 1 to 1.5 is tolerable, sometimes jerks and lags appear. In general, for an amateur level such a change is acceptable.
Var level is less than 1. A good indicator for the game. However, if the value of var is greater than 0, the correct solution would be to use several methods described in the article. This way you will reduce the likelihood of lags to a minimum during the most resource-intensive moments of the game, for example, during an attack on a bombsite, accompanied by explosions of smokes and molotovs.
Next, we will talk about the reasons that cause var jumps, as well as what to do when the var in CS GO increases, and how to bring it down to zero.
Causes of high var
The main “culprits” are: in sharp and unexpected jumps var are:
-
The video card is outdated or broken. Often the fault may be in its chipset.
-
Viruses picked up on the Internet.
-
The presence of a significant number of programs and processes that run in the background and require part of your device’s resources to maintain their functionality.
-
Cooling coolers are clogged with dust and dirt, as a result of which the components of your device overheat and cannot provide 100% performance.
-
Neglecting to systematically update the operating system, which is why the PC or laptop uses software versions that are currently outdated.
Priority measure to bring the vars in CS GO back to normal
So, what to do when the var in CS GO jumps and you urgently need to reduce it? What is needed, first of all, is a simple and energy-efficient measure that does not take a lot of time and effort and, most importantly, does not radically distract the gamer from the game process.
This is what we do. First, look into the game settings and try to start experimenting with graphics. Reduce those parameters that are not important for you personally, and start the game again. If it doesn’t help, then you need to reduce the drawing of shadows and the level of texture smoothing. In addition, sometimes a drop in var can be caused by reduced sound effects. In general, the first thing we recommend is to turn all the settings to minimum and check out the var after that. If it is small, then start gradually raising the graphics in order to find an acceptable balance between picture quality and quality.
Calling the console for help
If this method does not help, then there is another option on what to do with increased var in CS GO. Here a console with open FPS and var indicators will help you, which you need to enable in advance. How to do this was described at the beginning of the article.
After this, you should load a map with bots and constantly monitor the FPS indicator during the game. Situations with shootouts, explosions, and a large number of characters in one location require special attention. It is at these moments that FPS drops to a minimum. Write down your lowest score.
Then multiply the minimum fps level by 30%. This is the most suitable FPS value for your device. After this, you need to change the settings in the console by entering the command “fps_max A”. Instead of the letter "A" You should write the FPS value that is most suitable for your device.
Other methods
The recommendations outlined above usually solve the problem quickly and reliably. Now we’ll tell you what to do with a big var in CS GO if none of the tricks helped.
First. We remove everything from “Startup” Windows, no program or application should remain open. This way you will reduce the load on the RAM and processor.
Second. Launched torrents take up a lot of resources. We close torrents together with the torrent client.
Third. Install one of the latest versions of the operating system. If there is a licensed version, then download all the latest updates.
Fourth. The same goes for drivers. We need the latest versions.
Fifth. Spin your device, take a soft brush and remove all the dust from the inside, especially from the coolers.
Sixth. Ban the "OS" and programs start the update procedure automatically and without your permission.
Seventh. Destroy all viruses by running a full antivirus scan.
